(no title)
Spent most of the day on other projects such as building a wheeled cart for the bench-top tools (thanks to Jim Piavis for that idea) and putting in a new utility sink. I’m glad the prep work is finally coming to a close. Then I can concentrate on building the airplane.
I spent half an hour practicing countersinking on the drill press, so I wouldn’t screw it up again. It came out great this time. It still seems a bit unreliable. The depth of the four holes is slightly different, eventhough I used the same set up for each. Perhaps it depends on how much pressure you put on the countersink mechanism. I also did the required trimming on the HS-404 ribs. I used the bandsaw for rough cuts (which works very well BTW) and cleaned them up on the Scotch-brite wheel.
