Rudder skin riveting
Started riveting the rudder skins to the skeleton. Discovered that I had made a mistake a while back. I forgot to dimple the two holes on the front side of the top rudder rib. I wish I had noticed that before I riveted it to the spar. Luckily, I was able to pivot it out to the point where I could get the dimple dies on it and fix the problem.
I also had a problem getting some of the holes to line up perfectly. Some of the rivets were sitting crooked when I dropped them in. I borrowed a trick I read somewhere and re-dimpled both the skin and the rib together on the problem holes. That fixed it great. I’m about 1/3 done on riveting the rudder skins to the skeelton.
