More tools
Time to document the additional tools I’ve acquired over the past month or so.
From left to right starting at the top, there is the flaring tube, racheting crimper for electrical connectors, flexible shaft that I use sometimes with the electric screwdriver and deburring bit, an extra pair of cleco pliers (tired of always chasing down the one I have), black clecos (work great in the #8 screw holes), 3T tank dimple dies, angle die grinder with fine and coarse Scotch-brite wheels and some cut-off disks and mandrel, smaller fly wheel cutter that I picked up at Lowe’s, a Unibit with more steps and goes larger than the one I have, 1/4″ reamer for the bellcrank bushing, and finally a tap and die set from Sears.