« (no title)
(no title) »

(no title)

Prepped for the final ProSeal session. It’s amazing how I think I’m ready to ProSeal, and then an hour or so later I’m actually ready. I installed the inboard capacitive plate (a PITA) and screwed down the vent line fitting. I scuffed up the mating surfaces on the rear baffle, cleaned out the tank real well, and MEKed down all of the mating surfaces.

Here’s the tank from inboard to outboard:
image 3411 image 3410 image 3409 image 3408 image 3407 image 3406

And a shot of the inboard and outboard ends and a close up of the tank attach angle:
image 3414 image 3415 image 3413

So after all of the prep work I decided there really wasn’t time to do the baffle. Bummer.

This entry was posted on Monday, July 5th, 2004 at 9:47 pm and is filed under Fuel Tanks. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

Comments are closed.