(no title)
It took just a little more coaxing to get the F-684 gussets fitted. Putting in another slight bend where the gussets hit the firewall angle is the key. I then drilled the gussets to the firewall angle by peeling back the side skin. And finally I re-clecoed the side skin and drilled through the side skin, aux longeron, firewall bracket, and gusset.
Next I started fitting the F-902 bulkheads. It’s not much of a bulkhead compared to the others. It’s just two side pieces. I had to file the lower slot slightly and do some slight flange bending and fluting, but otherwise it fit nicely.
