Fuel vent fabrication
I ordered a better tube bender today. I’m going to wait until it arrives before tackling the fuel pump again.
I looked around for something simple to do. I decided to make the fuel vent fittings. They are basically modified fittings. I used the Scotch-brite wheel to remove the threads, cut off the end at an angle with the band saw, cleaned up the cut on the belt sander, and then did a final polish with the Scotch-brite wheel. I picked up some faucet aerators with screens at the Home Depot a few days ago. I was able to use just one screen to cover both openings. I cut the screen to shape with scissors and then used JB Weld to attach them after cleaning everything with MEK. They turned out pretty nice.
