« Subpanel seal
Subpanel fitting »

Hat section trimming

Worked more on the subpanel seal supports and trimmed the hat section that goes on the back of the subpanel. I think the hat section covers some of the canopy release mechanism.

This entry was posted on Saturday, June 25th, 2005 at 10:00 pm and is filed under Upper Fwd Fuselage. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

2 Responses to “Hat section trimming”

  1. Matthew Says:
    June 28th, 2005 at 5:50 am

    Dave,

    You’ll want to trim that hat section even more probably.. just enough to hold the canopy release mechanism. If you have any deep radio’s that section gets in the way.

  2. Dave Says:
    June 28th, 2005 at 7:48 am

    Thanks Matthew. I’ll do that.