More avionics mounting
I pre-drilled the side angles for some rivets that will hold it to the panel. I found a combination of wood that would hold the trays at the perfect height to match the opening. The vertical dimension of the opening actually looks pretty good now. I drew some guide lines on the back of the panel and used that to center the trays and clamped the angles into place. I did lots of measuring to make sure everything was even and right where I wanted it. All of the trays except the SL40 are snug, as expected. I’ll have to use some thin washers for the SL40. I’ll sleep on it and drill the angles to the panel tomorrow.
