Baffle seal trimming
Pop riveted the seals in place. The RTV didn’t hold so well. The seal material puckered between the rivets and lifted right off the RTV. Maybe I should have riveted them with the RTV not set up?? It won’t be a big deal. It seems like the seal will still push tightly against the baffle.
Worked on trimming the baffle seals to fit. I cut a few notches to allow the seal material to conform to the cowl and trimmed around the inlets a bit. The cowl seems to be sitting down pretty good. The process reminds me of trimming the baffles. It’s a lot of taking the cowl on and off and trimming.