Wing mating prep
I did some prep work before the big day tomorrow. I drilled the fairings to the wings.
I checked the fuel line lengths again, which ended up being perfect. I cut a few strategic holes in the wing conduits to allow mid-span wiring to the autopilot servo and heated pitot.
What better place to dine than on the wing while reading over my to-do list?
I also did a few engine prep items in hopes of being able to fire up the engine tomorrow as well. I re-installed and timed the P-mags. I put the remaining screws into the spinner. And finally, I removed the top spark plugs, removed the oil pressure line from the transducer and ran the starter in 20 second bursts until oil came out the line. It was cool to see the prop spinning around like crazy. Makes quite a wind.