Wing bolts
I helped Steve today with his project, removing the old refrigerator from his boat. Wasn’t too bad once we removed all the guts of the thing.
After Adele’s indoor soccer game, I stopped by the hangar. I put the rear spar bolts in, torqued, and cotter pins. I then went back to the main spar bolts. The bottom bolts are truly unpleasant on the nose draggers. The gear leg is in the way big time. I was able to get the nut on one of the bolts, but discovered I did indeed drive one bolt in too far by about 2mm. Not good. I tried various combinations of pry bar, hammer, and rivet gun, but couldn’t get it to budge outward at all. I’ll have to read up on what to do there. In any case, it’s going to take quite a while to get the bottom bolts all secured and torqued.